USP Motorsports USP418 996TT / GT2 800 HP Intercooler upgrades

USP Motorsports 996TT / GT2 800 HP Intercooler upgrades

The USP Motorsports intercooler upgrades provide better cooling efficiency for charged air, compared to OEM turbo or GT2, resulting in more power to the ground. An aluminum bar and plate design is utilized opposed to the factory plastic end tank, tube and fin design. The cores use a high density of fins inside the tubes for quick and efficient heat dissipation while utilizing a slightly less dense outer fin setup to provide excellent flow. This technology provides maximum cooling with minimal pressure drop.

Our intercoolers install just like factory and require minor trimming on the shrouds due to the cores being 40% larger then stock. They are high quality hand made and pressure tested, so each set guarantees attention to detail. OEM C-clip hose connections are retained for installation for an OEM style fit.

Specifications

• Efficiency: 89%
• Flow rate: 750 CFM per side
• Leak Tested: @ 35 PSI
• Pressure Drop: less than 1%
• Support HP: 800+

Dimensions

• Core Size: 16'' x 9'' x 3.5''
• Overall Size with End-tanks: 23'' x 9 x 3.5''
• Inlet/Outlet Diameter: 2.5''
• Charge Side Area: 30.6 cubic inch / side
• Core Volume: 504 cubic inch mass / side
• Core Volume vs. Stock: 40% larger