ROTORS ARE PROUDLY DESIGNED AND BUILT IN THE USA
**NOTE: As of 8/1/2012, all JHM Lightweight Rotors will now look like the picture below!!!***
Click to enlarge picture
Due to popular demand, all of our 2-piece, lightweight rotors will now come with black anodized rotor hats featuring Type 3, hard anodizing, the highest quality and hardest anodizing available for aluminum. This will make the rotor hats more resistant to fade and wear and will hide brake dust better. Due to popular, demand all lightweight rotor rings will also feature zinc plating. This high quality coating will slow the effects of corrosion and keep your rotor rings looking good through the winters.
In stock and ready to ship as of 8-1-2012.
FINALLY a low cost front BBK (Big Brake kit) solution for your B5 S4 that uses the popular Porsche Cayenne caliper (6-piston Brembo) while clearing OEM 17" wheels and most aftermarket 17" wheels as well.
**NOTE: Only fits the C5-A6s and allroads with the 2.7T motor or the 2005 C5-allroad with the 4.2L V8. This kit will not fit C5-A6s, S6s, or RS6s with the 4.2L V8.**
INCLUDES: 2 - JHM 2-piece Lightweight Slotted Front Rotors (330mm x 32mm), 2 - Black BRAND NEW OEM Porsche Cayenne(6-piston Brembo) Calipers (lines and bleeder screws swapped from end to end by JHM for proper performance on an Audi), 2 - Stainless DOT approved Brake Lines, 1 - Set OEM Pagid Pads or Hawk Performance Pads (select below), 2 - OEM Cayenne Brake Pad sensors (they work by only splicing 2 wires), 1 - Liter Pentosin DOT 4 Synthetic Brake Fluid and all bolts and hardware to mount the calipers with JHM exclusive 16mm to 14mm stainless bushings to snuggly fit the caliper. - DOWNLOAD INSTRUCTION ZIP FILE BELOW WITH PICTURES AND NOTES (not sent with kit)
INSTALLATION NOTES AND PICTURES HERE
Stock 321mm vs. JHM 330mm 2-piece for the Porsche Cayenne Caliper
-Rotor OD: Stock = 321mm(12.6"), JHM = 330mm(13") - .4" larger
-Rotor Thickness: Stock = 30mm(1.18"), JHM = 32mm(1.26") - thicker
-Rotor Weight: Stock = 21lbs(each), JHM = 19.5lbs(each) - 7% LIGHTER, 1.5lbs less each
-Rotor Cooling Air-gap: Stock = 11mm(.433"), JHM = 15.5mm(.610") - LARGER for better cooling
-Rotor Cooling Center Fin Design: Stock = Straight Fin, JHM = Airfoil - MORE EFFICIENT for better cooling
-Bolt pattern: - SAME (fits like an OEM rotor would)
Why the Porsche Cayenne caliper? With its 6-piston design and MASSIVE brake pads it is a strong performer. Also it bolts right up to your spindles with NO brackets. All you need is some bolts, nuts, brake lines and JHM rotors and you have a 330mm BBK. Being that it is an OEM part they are readily available and can be found used for great prices.
Outer ring specs:
We worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the B5 S4 with a Cayenne caliper bolted on. 12 attachment points for durability and strength.
Center hat specs:
We CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 12 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn't jump out or look tacky.
Note - This brake upgrade only fits under 17" wheels or larger. It fits stock 17" B5 S4 wheels with NO wheel spacer and most other OEM and aftermarket wheels as well.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
|Note: JHM works hard to make all fitment charts as accurate as possible please read the product description to make sure this is correct for your vehicle.|
|Audi||A6 - C5||2000 - 2004|
|Audi||Allroad - C5||2000 - 2005|
|Audi||RS4 - B5||2000 - 2002|
|Audi||S4 - B5||2000 - 2002|