Loading... Please wait...
  • Call us on 978-494-4104
  • My Account
  • Gift Certificates
  • Image 1

AWE Tuning - RWD Carrera GT Straight Pipe Kit alone car

$2,695.00
Quantity:
SKU:
AT-RWD-CGT-STR-Pipe-Kit
Availability:
Built to order. Expect shipment in 1-2 weeks.

Product Description

The results of our Carrera GT exhaust development were significant, given the high level of engineering that went into the factory system. Our comprehensive testing included dyno testing of the vehicle with the stock exhaust in place and removed, so that we knew exactly what we were up against with our design challenges. No wonder Autoweek has called this the AWE Tuning donned Carrera GT "audio nirvana" and "audible delight."

Option highlights:
  • +12 ftlbs crank torque gain at 3000rpms with muffler
  • +22 ftlbs crank torque gain at 3200rpms, +12 hp crank gain at 6700rpms with straight pipes
  • 26 lbs weight savings with muffler
  • 50 lbs weight savings with straight pipes
  • 100% stainless steel tubing and flex joints
  • Lifetime Warranty
The factory muffler is an impressive piece, consisting of several chambers and vacuum actuated flaps to give a very high pitched street legal sound without impacting power output tremendously. However, the results of this type of sound control results in a muffler weighing in at over 75 lbs, which is the heaviest muffler we have ever weighed for a mid or rear engine vehicle.

By eliminating the flap mechanisms, as well as using a straighter path for the exhaust gasses, we were able to gain quite a bit of power in the low end of the rpm range, while virtually matching the stock muffler high rpm power output. And in the process, we were able to shave off 26lbs from the assembly, resulting in a 49 lbs muffler weight. The sound is just slightly louder than stock as measured in the cabin, and with a tone that is a mix between the high pitch of the stock muffler and the low pitch of the open exhaust with no muffler.

Our system is also modular, meaning that straight pipes can be installed to delete the muffler, resulting in a very aggressive sound and even more power gains. Installation of the straight pipes means another 24 lbs of weight savings over stock.

Considerable time was taken to document critical interface issues of the exhaust and the rest of the vehicle. The factory design uses a hemispherical gasket shape where the muffler inlet tubes mate to the over-axle pipes. Through careful digitizing of this gasket's profile, we were able to duplicate the tubing shape that it is clamped against, ensuring a leak-free seal. We also use a stainless steel lined braided flex joint on each inlet tube, just like the factory. A lined flex joint allows for proper heat expansion/contraction of the system while permitting an uninterrupted smooth bore for ultimate gas flow. Special high temperature tubing wrap is used on the inlet tubes and tailpipes, just like factory, to ensure proper heat shielding to carbon fiber structural and trim pieces. We also increased tubing diameter from 2.75" to 3.00". All adjustments for fitment are retained, just like factory.

Like all our exhaust products, fitment, performance, sound tone and volume are all carefully documented, verified, and field tested by our engineers and designers.

Please note: each muffler is hand built to order, and a non-refundable deposit will be taken at time of placing order. Please allow 3-4 weeks build time.

As with all AWE Tuning exhaust products, each TIG weld is hand finished internally, only butt-welded junctions are used, and flange openings are size matched to their ports, all to produce the smoothest flow possible. It is this intensive attention to detail that sets AWE Tuning exhaust products heads and shoulders above the rest.

Our exhaust systems are handbuilt works of art, are award winning, and are what your Porsche deserves.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!